During last summer I research on use and how-to’s for producing a lighting fixture. This lighting fixture is meant to fix to a wall, have its own power source, and the ability to point the light source, used to elucidate artwork, trophies, plaques, and other prized possessions.
The first solution is a basic premise that has two joints, one at the head of the fixture and another in the middle, for turning ability. Its head is cylindrical and its shape provides a sleek and uniform appeal. The lens contours with the shape of the head to make a full circle.
Pros - sleek design
- adequate turning
- variability
Cons - complicated design
The second solution is similar to the first design except that the head is flattened at the lens to allow a different lighting angle. Also the joints are at the base of the head and at the connection of the back-plate to the fixture. This also allows for a sleek and uniform appeal to the industrial world.
Pros - Sleek design
- adequate turning
Cons - complicated design
The third solution is the more dissimilar of the other two. Its head is a lamp-like shape and makes for a circular lighting. There are also three joints in this design and it allows for various degrees of movement. This will also have LED lighting as the other two do.
Pros - great degree of turning
- simple design
Cons - unappealing design
Monday, October 29, 2007
Monday, October 1, 2007
Subscribe to:
Posts (Atom)